The selection and installation of radiators!

There are three types of heat dissipation methods for radiators: conduction, radiation, and convection. Heat conduction refers to the transfer of heat from the heat medium inside the radiator to the inner wall of the radiator through heat exchange, and the inner wall transfers heat to the outer wall through heat conduction; A radiation radiator refers to a radiator that primarily dissipates heat to a heating room through radiation and supplemented by convection; Convective radiators first heat the indoor air and transfer heat to the human body through convective heat transfer, making people feel warm.

Its thermal comfort is not only affected by its own material and structure, but also by various factors including planar and vertical temperature distribution, wind speed, pressure, and moderate radiation heat. Therefore, its installation position is also an important factor affecting heating comfort.

We comprehensively consider four aspects: cost, comfort, heating effect, and safety, and provide the following suggestions to users:

Selection of radiator specifications

Firstly, Jiuding Radiator, Tianjin Jiuding Sunshine HVAC Co., Ltd. needs to consider the following factors when selecting radiators. In general, we should determine the height and width of the radiator based on factors such as the room's heat demand, orientation, decoration style, as well as the placement and heat dissipation of the radiator, in order to decide which model and category of radiator to choose to achieve the best heating effect.

"We use numbers to speak. If your floor is lower or even lower, it is recommended to choose a radiator with a height of 150cm~180cm to prevent excessive pressure from causing explosion accidents. For users with higher floors, it is recommended to choose a radiator with a height of 60cm~120cm that is shorter to prevent insufficient heating pressure from affecting their heat dissipation effect. For mid-level users without heating pressure, they can choose a radiator with high cost-effectiveness according to their actual needs."

After selecting the appropriate radiator, the next step is to install the radiator. So what are the precautions during the installation of the radiator?

Installation position of radiator

Under normal circumstances, the optimal installation height for radiators is about 20cm above the ground to ensure that the entire room can heat up during the convection process. At the same time, the installation of the radiator needs to be at a distance of 3cm to 4cm from the wall, and the height of the pipeline should be left at around 150cm to ensure the activity of air around the radiator and achieve the best heat dissipation effect. In the actual installation process, we follow the following principles:

It is better to be short than high

When the volume of air expands when heated, it will flow upwards. If the radiator is hung too high, it is easy to cause heat to concentrate on the top of the room, causing the user's body temperature to be lower than the design temperature, affecting the heating effect and comfort of heating.

Can be installed in areas with strong cold air flow such as under windows and behind doors

Under the window and behind the door are areas with strong cold radiation, as well as areas with strong cold air flow. When outdoor cold air enters the room through doors and windows, the radiator will emit heat and directly heat the surrounding cold air, causing the cold air to heat up while forming thermal convection with the indoor air, making people in the warm flow area feel comfortable. In addition, the radiator under the window also has the effect of preventing cold radiation and cold air circulation, making it less noticeable for cold air to enter when approaching cold windows.

Can be installed on the inner wall

Placing the radiator behind the door can bring better heat dissipation effect, but it is also limited by the size of the door frame and the decoration style, which can affect the overall aesthetics of the interior. Therefore, some installation techniques can be adopted to achieve good heat dissipation without affecting aesthetics. The inner wall has a certain area advantage, and replacing a group of radiators with two relatively short ones at the diagonal can also achieve good heat dissipation effect.

Can be installed in areas with frequent family activities

For example, installing a radiator in the living room can be installed near the sofa or other areas where it usually stays for a long time, but it is important to avoid the sofa blocking the radiator; The radiator in the restaurant can be installed next to the dining table. If the living room is integrated with the restaurant, it is recommended to install radiators diagonally to enhance the convection effect of hot air; The radiator in the bathroom is usually installed near the toilet, but be sure not to install it in the shower area to avoid corrosion of the radiator by shower water. While considering aesthetics, more attention should be paid to heating effects in order to improve the quality of life.

Regarding us:

Jiuding Radiator covers an area of 45000 square meters and has introduced advanced radiator production line equipment from both domestic and foreign countries, including Panasonic from Japan, automatic CNC, group welding machine, CNC flash welding, Swiss Jinma electrostatic spraying equipment, and fully automated packaging production line. Its product research and development capabilities are at the forefront of the industry. The thermal performance, internal corrosion resistance, and surface paint film of the product have passed the quality inspections of Tsinghua University and the National Radiator Quality Inspection Center, respectively, and are at the leading level in the industry.

Jiuding Radiator is a high-end radiator brand produced by Jiuding Sunshine HVAC in Tianjin. It is located in the Economic Development Zone of Ninghe District, Tianjin and is a designated professional manufacturer of new heating radiators by the Ministry of Construction. With over ten national level product patent advantages, we have made outstanding achievements in the field of heating radiators and continuously refreshed the standards of heating equipment to new heights.

Jiuding radiator has passed the ISO9001 international quality control system certification and ISO14001 international environmental management system certification in one go. The product has a beautiful appearance and excellent quality, which can fully meet the needs of users at different levels. The factory implements 5S management, relying on advanced design concepts and continuous innovation spirit, with an annual production capacity of 4 million columns. The product line covers six series, including steel pipe type, steel column type, copper aluminum composite, steel aluminum composite, and all copper, with 38 varieties and over 600 specifications. Among them, "steel column type and lap welded pipe type radiators" have been rated as industry-leading heating products by the Ministry of Construction. The Jiuding radiator produced by the company has been awarded dozens of honors, including "Top 10 Heating Radiator Brands", "National Supervision and Inspection Product Quality Stable and Qualified Famous Brand", "Green Energy Conservation and Environmental Protection Product", and "Tianjin Famous Brand Product".

Jiuding radiators are popular in more than 20 provinces, cities, and autonomous regions in China, and are exported to European countries such as Italy, Germany, the United Kingdom, and Russia. It has over 300 domestic agent distributors and more than 20 large foreign procurement wholesalers. We have established partnerships with many large building materials supermarkets, such as B&T Home, Fantasy Home, Red Star Macalline, Oriental Home, etc; Forming strategic alliances with multiple well-known domestic decoration companies such as Yezhifeng, Yaguangya, and Jinyu; We have established strategic partnerships with multiple real estate companies such as Poly Real Estate, Vanke Group, and Shouchuang Real Estate.